OXITEC® 5000
Durable oxygen analyzers for precise and rapid process control. The OXITEC 5000 oxygen analyzer was developed by ENOTEC and is manufactured entirely in Germany.
Regarding the OXITEC 5000
SILOTEC® 8000: Glowing ember detection in silos
Fast and reliable COe / O2 gas analysis in ATEX zone 20
Silos for storing coal dust and coal bunkers are used in numerous branches of industry. There is always a risk of an explosive dust atmosphere, which must be monitored. This is where the self-monitoring SILOTEC 8000 comes into play, which was specially developed for rapid gas analysis in ATEX Zone 20 silos. In addition, ENOTEC offers products for a wide range of applications, such as in incineration plants at flue gas temperatures of up to 1400 °C, with high dust loads and in corrosive or reducing exhaust gases.
Our promise:
We at ENOTEC will find a solution for every application, whether customised or from series production. Our customers benefit from our experienced staff and our globally active and well-versed sales and service team.
Around the clock and all over the world.
Your advantages at a glance:
Fast glow fire and inertization monitoring in silos
Direct COe measurement for ATEX zone 20
Plug & Play complete solution for silo operators
ENOTEC REMOTE App
Functional safety: certified according to SIL2
Automatic self-diagnosis and self-cleaning
ENOTEC - Applications in silos
Example of a possible application in a coal dust silo in a coal grinding plant:
The coal dust is fed from the separators into a silo. The SILOTEC 8000 self-monitoring measurement system is installed on the silo roof.
SILOTEC 8000 enables the fast, reliable and therefore safe analysis of oxygen, carbon monoxide and methane in silos with ATEX zone 20 and other potentially explosive dust atmospheres. The simultaneous measurement of O2 and COe enables the detection of smouldering fires and thus monitors the quality of inertization.
The system is completely maintenance-free with IP protection class 65 for easy installation on silo roofs. The sampling probe is certified for dust Ex zone 20 and the GRP housing, which is located outside on the silo roof, for dust Ex zone 22. The electronics are mounted in a non-Ex zone. Due to the fast in-situ measurement, there is no need to install a maintenance-intensive and slower extractive analysis system.
Our products
The oxygen concentration is the most important parameter when assessing whether a combustion process is being operated efficiently
The simultaneous information about the COe content also enables the plant operator to immediately assess whether their process is safe. ENOTEC has set itself the task of producing the best measuring device in the world for every process, which measures in situ, i.e. directly in the process. We also offer TÜV-certified (QAL1 / MCERTS) and SIL2 with a 1oo1 selection and ATEX-certified products that have a long service life and are extremely low-maintenance for years of continuous use.
Filter products
OXITEC
OXITEC
OXITEC® 5000 GasEx
The robust OXITEC GasEx analyzer ensures safe and reliable in-situ O₂ measurement. Regarding the OXITEC 5000 GasEx
OXITEC
OXITEC® 500E
The extractive OXITEC 500E analyzer in a 19" rack-mount design for continuous oxygen measurement was specifically designed for installation in analysis cabinets and incorporates the same sensor technology as already used in the proven OXITEC 5000 oxygen analyzers. Regarding the OXITEC 500E
COMTEC
COMTEC® 6000
The COMTEC 6000 InSitu Gas Analyzer is designed for the determination of oxygen and COe in redundant, real-time measurements in flue and process gases. This is achieved by combining an MXP sensor for COe analysis with the technology of an MLT sensor for oxygen measurement. The COMTEC 6000 allows plant personnel to optimize combustion by fine-tuning the process. Regarding the COMTEC 6000
COMTEC
COMTEC® 6000 GasEx
The COMTEC 6000 GasEx combines the O₂ and COe sensors in a robust, ATEX-certified in-situ analyzer. Rapid responses to changes enable safe measurement of oxygen and COe, for example, in refineries or similar applications where there is a risk of explosion (Gas Ex zones 1/2). Regarding the COMTEC 6000 GasEx
COMTEC
COMTEC® 6000 StaubEx
The COMTEC 6000 StaubEx is a highly robust in-situ analyzer for measuring O₂ and CO₂ in process gases with abrasive dust loads. The system is ATEX certified for Class II 2D Ex tb IIIC T133°C/141°C Db. Regarding the COMTEC 6000 StaubEx
SILOTEC
SILOTEC® 8000
The SILOTEC 8000 - fast, reliable and safe COe and O2 gas analysis for ATEX Zone 20 in silos and other potentially explosive dust atmospheres.
Regarding the SILOTEC 8000
CEMTEC
CEMTEC®
The CEMTEC features self-cleaning properties and unparalleled mechanical strength for continuous measurements to optimize the pyroprocess in cement plants.
At CEMTEC
ENSITU
ENSITU® 7000
Install, switch on and measure. ENSITU 7000, the affordable entry-level product from ENOTEC.
Regarding ENSITU 7000
AQUATEC
AQUATEC® 1000
Controls and reduces drying time by means of rapid O2 and H2O measurement.
Regarding the AQUATEC 1000In situ measuring principle
The sensors for oxygen and unburned molecules produced by ENOTEC measure directly in the flue gas.
The structure of the sensor technology and the patented filter design have been continuously developed and optimized over the last few decades. The smallest changes in the gas composition are detected within seconds and form the basis for safe and efficient plant operation - permanently and sustainably.
Certified safety.
Tested quality.
Our equipment meets the highest requirements.
Suitability test in accordance with
DIN EN 15267
Quality management in accordance with
DIN ISO 9001
ATEX test certificate
Our focus has always been on performance and quality
Since 1980, ENOTEC has specialized in the manufacture of devices for gas analysis.
