ENOTEC Emission measuring devices for emission monitoring
Emission measuring devices are essential in power plants and incineration plants, not only to control the combustion processes and optimize them if necessary, but also to measure the flue gases emitted and check whether the emission values prescribed by the government have been met.
However, not every emission analyzer is suitable for every system. ENOTEC therefore offers you an entire product range of flue gas and process gas analyzers that can be used as emission measuring devices. One of the best-running emission analyzers and widely used worldwide is the OXITEC 5000 oxygen analyzer.
This O2 analyzer is used in combustion plants with temperatures of up to 1,400 °C for fuel and combustion optimization, among other things, and enables fast and precise monitoring of processes and emission measurements.
Information
The COMTEC 6000 StaubEx is suitable for use in dust Ex protection zones 21 / 22 and meets all the requirements for use in such dust environments. This is confirmed by the ATEX certification. The precise measurement of the oxygen and COe content in the flue gas enables the safe and optimized operation of incineration plants, as dangerous undesirable developments in the process can be identified and avoided at an early stage.
ENOTEC sells emission measuring devices for process-controlled drying systems under the name AQUATEC 2000. In contrast to incineration systems, these sensors measure the oxygen content and moisture during emission measurements. This means that AQUATEC 2000 analyzers can be used not only as emission measuring devices, but also to detect cracks and steam pipes.
Certified safety.
Tested quality.
Our equipment meets the highest requirements.
Suitability test in accordance with
DIN EN 15267
Quality management in accordance with
DIN ISO 9001
ATEX test certificate
Our focus has always been on performance and quality
Since 1980, ENOTEC has specialized in the manufacture of devices for gas analysis.
